Worked architecture · Manufacturing

Every unit inspected. Every defect traced to its cause.

A reference architecture for manufacturers where quality depends on sampled manual inspection. Cameras inspect every unit on the line, defects are classified and logged, and process data is analyzed to predict quality drift before it produces scrap.

  • First workflow live in 30 days
  • State-changing actions are logged
  • Deploys inside the systems you already run

Architecture at a glance

  • Capture

    Imagery and process data collected at the points where quality is decided.

  • Inspection and prediction

    Defects detected and classified per unit; quality drift predicted from process conditions.

  • Line integration

    Results reach the operator, the line controller, and the quality system in real time.

  • Governance and measurement

    A complete quality record and a scorecard the plant runs on.

Worked example for Manufacturing. Scope, integrations, and controls are adapted to your systems during design.

The problem

Manual inspection samples a fraction of production, varies by inspector and shift, and finds defects after the cause has moved on. The architecture below inspects every unit, classifies what it finds, ties each defect back to the process conditions that produced it, and gives the line a warning before quality drifts.

Who it is for
  • Plant and quality managers running sampled, manual inspection
  • Operations leaders carrying scrap, rework, and warranty costs they cannot trace
  • Manufacturers whose customers require a complete quality record per unit

How the system works

Four layers, each with a defined job. Every layer logs to the same audit trail and honors the same approval rules.

Layer 1

Capture

Imagery and process data collected at the points where quality is decided.

  • Fixed cameras and lighting at inspection stations
  • Image capture triggered by the line controller
  • Process sensor data: temperature, pressure, speed, torque
  • Unit identity from barcodes or serial tracking

Layer 2

Inspection and prediction

Defects detected and classified per unit; quality drift predicted from process conditions.

  • Defect detection and classification models trained on your products
  • Measurement from imagery for dimensional checks
  • Predictive quality models correlating process data with defect rates
  • Confidence thresholds with a review queue for uncertain cases

Layer 3

Line integration

Results reach the operator, the line controller, and the quality system in real time.

  • Manufacturing execution system integration for unit disposition
  • Operator display with the finding and the recommended action
  • Line controller signals for reject, hold, or stop
  • Quality management system records per unit and per lot

Layer 4

Governance and measurement

A complete quality record and a scorecard the plant runs on.

  • Audit log of every inspection decision and operator override
  • Traceability from defect to process conditions and lot
  • Dashboard for defect rate, scrap, rework, and first-pass yield
  • Retraining schedule as products and processes change

Build sequence

The order we build in, so the first live workflow proves the platform before the higher-stakes steps are automated.

  1. 11
    Phase 1

    Assess the line

    Identify inspection points and defect types, review existing imagery and process data, baseline defect, scrap, and rework rates, and agree the scorecard.

  2. 22
    Phase 2

    Capture and label

    Install cameras and lighting, collect and label imagery against your quality standard, and connect process sensor data.

  3. 33
    Phase 3

    Train and shadow

    Train detection and classification models, run alongside manual inspection, and compare results until agreement holds.

  4. 44
    Phase 4

    Integrate and extend

    Connect line control and the quality system, go live by station, add predictive quality analytics, and extend to further lines.

Each phase ends with a working deliverable and a decision point.

What the system takes over

Inspection

  • Surface and assembly defect detection
  • Dimensional checks from imagery
  • Label and marking verification
  • Unit disposition to the line controller

Quality analytics

  • Defect classification and trending
  • Process drift prediction
  • Root cause correlation to process conditions
  • Per-unit and per-lot quality records

Controls

What stays with a person, and how the system is kept inside its limits.

  • Line stop decisions follow your rules; the system recommends, the operator or controller acts
  • Uncertain inspections route to a person rather than passing by default
  • Every decision is logged against the unit and can be reviewed
  • Models are revalidated whenever a product or process changes

How success is measured

We baseline each measure from your own records during assessment and report against it from the first week in production. Targets are set per engagement, in your numbers, not quoted from a market study.

Defect escape rate

Defects found downstream or by customers per units shipped, against your baseline.

First-pass yield

Share of units passing inspection without rework.

Scrap and rework cost

Cost of scrapped and reworked units per period.

Inspection coverage

Share of units inspected, versus the sampled baseline.

Time to detect drift

Time from a process change to the quality alert.

Inspector time

Hours per shift spent on manual inspection versus investigation.

How it is delivered

This architecture ships through the programs below, with published pricing, or as a custom build when your workflow sits outside them.

Capabilities it draws on

The core capabilities underneath this architecture, and what each one is good for.

See how the same method applies across every function in Why STRAVYNT.

Want this architecture adapted to your manufacturing operation?

One strategy call. We will map it to your systems, name the first workflow to go live, and give you a fixed price for the build.